User's Manual

Network/Power Unit
Front Panel
Your Network/Power Unit has LEDs which indicate the functioning of your unit. If you are
experiencing problems with your wireless router, call your Internet Service Provider’s service
desk. The service personnel may ask you to refer to the LEDs on the Network/Power Unit.
When you call, make sure you can see the LEDs to be able to give the information to the
service personnel.
1. PWR/ LAN - shows the local area network activity and that the unit power is “ON”
2. Anchor: - shows the status in the network and gives wireless link information; if this
light is off you may not have a connecti on to the internet
1. PWR/ LAN
2. Anchor
3. Network