User's Manual

Nokia RoofTop™ Wireless Router Installation Guide 27
Main installation steps
4.1.2 To plan the Network/Power Unit location
The Network/ Power Unit can only be physically located by being
plugged into an AC outlet. When locating the AC outlet for the Network/
Power Unit consider:
• The location of the customers PC - the Network/ Power Supply
should be located as close to the PC as possible
• The route of the multiwire cabling
• The proximity of a telephone connection point (where applicable for
HomePNA)
4.1.3 To plan the cable routing
• Take into account the customers wishes for cable routing
• Avoid pipes, downspouts and possible areas which may abrade the
cabling.
For further details see Chapter 6, Routing the cable into the property.
4.1.4 To plan the grounding
Test the existing grounding system at the property. Where the existing
grounding is not acceptable, consider...
• Route of the grounding cable from the router, avoiding other pipes,
down spouts etc
• Location for the grounding rod