User's Manual

Instructions
• Read and follow all safety and operating instructions
• Heed all precautions and warnings in the instructions and on the
equipment
• Keep instructions for future use
Hazard Warnings
•
Environment
- Do not place the Network/Power Unit in a very cold,
dusty, wet or high humidity environment.
The unit should be
situated away from all heat sources such as radiators, heat
registers, stoves, amplifiers and other heat producing
appliances.
•
Fire or Electric Shock
- Do not expose the Network/Power Unit to
any type of moisture, including rain. Do not use or install near water-
related environments such as sinks, bathtubs, laundry areas, spas,
swimming pools, or in wet basements. Take care not to spill any
liquids on the unit.
•
RF Exposure
To comply with RF safety requirements, do not go
closer than 20 cm of the antenna on the roof when the Network/Power
Unit is plugged in.
Grounding
• Be sure the wireless router and antenna system is grounded to
provide protection from voltage surges and built-up static charges.
Section 810 of the National Electrical Code ANSINFPA No 70-1984
provides information about proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an antenna
discharge unit, connection to grounding electrodes and requirements