User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濌濋澳
澳
6. Enter up to four keys in WEP Key 1, WEP Key 2, WEP Key 3 and
WEP Key 4 respectively. You can type either up to 5 Ascii characters or up
to 10 Hexadecimal characters as WEP Key.
7. Click Submit
Configure to associate WLAN with WPA / WPA2 authentication
Figure 89 - WLAN15 Security Setting – Associating WLAN with WPA / WPA2 authentication
1. Go to Configuration > Wireless > Radio1(5G) > Station >
WLAN0 > WLAN Security
2. Select WPA / WPA2 in Authentication Mode
3. Select suitable encryption mode in Cipher Mode as the
followings:
If Authentication Mode is WPA:
TKIP
+ AES
This algorithm automatically selects TKIP or AES based on
the client’s capabilities
TKIP
This algorithm provides greater compatibility with older
client
devices, but is not supported by the 802.11n standard.
AES
This algorithm provides enhanced security over TKIP, and is
the only encryption algorithm supported by the 802.11i standard.
If Authentication Mode is WPA2:
AES
This algorithm provides
enhanced security over TKIP, and is
the only encryption algorithm supported by the 802.11i standard.