User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濌濅澳
澳
4.3.1.8 Configure WLAN # QoS
Please refer to Quality of Service (QoS) on page 129
4.3.1.9 Configure WLAN # Bandwidth Control
Figure 82 – 2.4G WLAN # Bandwidth Control
1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN >
WLAN # > Bandwidth Control
2. Specify the uplink and downlink limitation under Based on WLAN
for the particular WLAN
Or specify the uplink and downlink limitation under Based on Station
for each associated station. 0 is default value and denotes as disable
3. Click Submit
4.3.1.10 Apply Submitted Configurations on the CPE Device
1. Click Save & Apply from the top on the right.