User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濌澳
澳
transmission and reception statistics, and connection information.
Radio1 (5G) – display 5G radio’s information including radio settings, radio
transmission and reception statistics, and connection information.
Ethernet - shows the current status of Ethernet interfaces. The information includes
Port, MAC Address, Auto-negotiation, Speed, Duplex, Link Detected, instant throughput of
uplink and downlink and traffic of of uplink and downlink.
Logs - display log files for system information, association activity, and alarm event.
2.2. Configuration
Figure 3 – Secondary tabs under Configuration tab
Configuration tab contains various configuration attributes about the device. The
following tabs can be found under configuration tab:
System – the configuration attributes about system information, logging, Network
Time Protocol (NTP), and web setting can be found in this tab.
Network – the configuration attributes about IP address, interface assignment, VLAN,
built-in DHCP server, port forward, and safe mode can be found under this tab
Wireless – the configuration attributes about both 2.4G radio and 5G radio can be
found under this tab
Thin AP - the configuration attributes about thin AP mode can be found under this tab
2.3. Administration
Figure 4 – Secondary tabs under Administration tab
Administration tab contains various configuration attributes for managing the device.
The following tabs can be found under configuration tab:
User Admin – collects the configuration attributes about user administration of the
device
SNMP – collects the configuration attributes about Simple Network Management
Protocol (SNMP)
Certificate – upload certification file and key file for HTTPS connection of the device
Firmware Update – update the firmware of the device
Factory Default – perform factory reset for the device
Backup/Restore – backup the current configuration from the device or restore the