User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濋濉澳
澳
13.
Enter suitable secrets in Secret of RADIUS Accounting Server. It
is used along with the MD5 hashing algorithm to obfuscate passwords. This
secret MUST be as the same as that in RADIUS server. This entry is optional.
14.
Repeat step 11-13 if the backup RADIUS Accounting server is
available. It is optional.
15. Click Submit
Configure WLAN with WPA-PSK / WPA2-PSK / WPA-auto-PSK
Authentication
Figure 76 - WLAN # Security Setting: WPA-PSK / WPA2-PSK / WPA-auto-PSK Authentication
1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN >
WLAN # > WLAN Security
2. Select WPA-PSK / WPA2-PSK / WPA-auto-PSK on Authentication
Mode
3. Select suitable encryption mode on Cipher Mode
If Authentication Mode is WPA:
TKIP
+ AES
This algorithm automatically selects TKIP or AES based on
the client’s capabilities
TKIP
This algorithm provides greater compatibility with older client
devices, but is not supported by the 802.11n standard.
AES
This algorithm provides enhanced security over TKIP, and is
the only encryption algorithm supported by the 802.11i standard.
If Authentication Mode is WPA2: