User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濊濌澳
澳
4.3.1.5 Configure WLAN # General Setting
Figure 71 - WLAN # General Setting
1. Go to Configuration > Wireless > Radio0 (2.4G) > WLAN
Configuration > WLAN # > More…
2. Select Enable WLAN checkbox to enable WLAN
3. Select Hide SSID checkbox to hide SSID name from its beacon
frame. This entry is optional.
4. Enter a unique name for the particular WLAN on SSID.
Note:
-
If you want to configure the same SSID on two different
WLAN; their security setting MUST be different from each other.
5. Select User Isolation checkbox to block user communication
within the same SSID in the AP directly. This entry is optional.
6. Deselect the DHCP Trust Port checkbox to prevent illegal DHCP
servers offering IP address to DHCP clients via this WLAN. This entry is
optional.
7. Specify the suitable privilege of associated clients on Access
Traffic Right; the options include
Full Access - Associated client can access Internet and manage AP
AP Management Only - Associated client can manage AP only, but not able to
access the Internet
AP Management Disable - Associated client can access the Internet, but not
able to manage AP