User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濉濌澳
澳
4.3.1.1 Configure General Wireless Setting
Figure 61 - 2.4G General Setting
1. Go to Configuration > Wireless > Radio0(2.4G) > General
2. Select Enable Radio checkbox to enable radio interface
3. Select Repeater in Radio Mode
4. Select the correct country code on Country Code; this option
ensures that the CPE device uses only the radio channels allowed in your
country or region
5. Select suitable transmission power on Transmission Power;
Note:
-
You should follow the regulation from local
Communications Authority
6. Enter the maximum associated client between 1 and 256 on
Maximum Client that the radio interface serves. 256 is the default setting.
This entry is optional.
7. Select Enable Inter-WLAN User Isolation checkbox that CPE
device block the users’ communication across different SSID in the AP
directly. This entry is optional.
8. Click Submit