User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濉濋澳
澳
4. Enter an ASCII string between 8 and 63 characters long or a HEX
string with 64 characters long on Pass Phrase that matches with remote AP
5. Click Submit
4.2.2.4 Configure WLAN 0 QoS
Figure 60 – 5G WLAN 0 QoS
1. Go to Configuration > Wireless > Radio1(5G) > WLAN0 > QoS
2. Select Enable DSCP-to-WMM Mapping checkbox that CPE
provides different QoS to the incoming packet with the corresponding DSCP
value
3. Enter DSCP value on Best Effort (BE), Background (BK), Video
(VI), and Voice (VO); these entry is optional
4. Click Submit
Note:
-
CPE classify the packet without DSCP marking as Best
Effort (BE) traffic
4.2.2.5 Apply Submitted Configurations on the CPE Device
1. Click Save & Apply from the top on the right.
4.3. Repeater Mode
4.3.1 Radio0 – 2.4G