User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濉濊澳
澳
Configure to associate WLAN with WPA-PSK / WPA2-PSK
authentication
Figure 59 - WLAN 0 Security Setting – Associating WLAN with WPA-PSK / WPA2-PSK authentication
1. Go to Configuration > Wireless > Radio1(5G) > WLAN0 > WLAN
Security
2. Select WPA-PSK / WPA2-PSK in Authentication Mode
3. Select suitable encryption mode in Cipher Mode as the followings:
If Authentication Mode is WPA:
TKIP
+ AES
This algorithm automatically selects TKIP or AES based on
the client’s capabilities
TKIP
This algorithm provides greater compatibility with older client
devices, but is not supported by the 802.11n standard.
AES
This algorithm provides enhanced security over TKIP, and is
the only encryption algorithm supported by the 802.11i standard.
If Authentication Mode is WPA2:
AES
This algorithm provides enhanced security over TKIP, and is
the only encryption algorithm supported by the 802.11i standard.
If Authentication Mode is WPA-auto:
TKIP
+ AES
This algorithm automatically selects TKIP or AES based on
the client’s capabilities