User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濈濄澳
澳
4.2.1.2 Step 2: Configure WLAN 0 General Setting
Figure 42 – 2.4G WLAN 0 General Setting
1. Go to Configuration > Wireless > Radio0(2.4G) > Station >
WLAN0 > More…
2. Select Lock AP Mac checkbox to force station that associate the
AP with MAC address in Remote AP MAC only. This entry is optional.
3. Enter the desired SSID on Remote SSID that station is going to
associate or click
[Scan] to look for the surrounding SSID.
Figure 43 – 2.4G WLAN 0 AP scan result
4. Select any one SSID checkbox shown on AP Scan Result, and then
click Select.