User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濈濃澳
澳
4.2. Station / CPE Mode
Station / CPE acts as a terminal and associated equipment located at a subscriber's
premises and connected with a carrier's telecommunication channel at the demarcation
point.
4.2.1 Radio0 – 2.4G
4.2.1.1 Step 1: Configure General Wireless Setting
Figure 41 – 2.4G General Setting
1. Go to Configuration > Wireless > Radio0(2.4G) > General
2. Select Enable Radio checkbox to enable radio interface
3. Select Station in Radio Mode
4. Select maximum transmission power on Transmission Power
5. Click Submit