User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濇濅澳
澳
14.
Enter suitable secrets in Secret of RADIUS Accounting Server. It
is used along with the MD5 hashing algorithm to obfuscate passwords. This
secret MUST be as the same as that in RADIUS server. This entry is optional.
15.
Repeat step 11-13 if the backup RADIUS Accounting server is
available. It is optional.
16.
Click Submit
Configure WLAN with WPA-PSK / WPA2-PSK / WPA-auto-PSK
Authentication
Use of WPA or WPA2 provides enhanced security over WEP, and allows client
authentication based on either a pre-shared key (PSK), for home or small office networks.
WPA-auto-PSK is a mixed security mode which supports multiple implementations of the
WPA standard, such as WPA-PSK and WPA2-PSK.
Figure 34 - 5G WLAN # Security Setting: WPA-PSK / WPA2-PSK / WPA-auto-PSK Authentication
1. Go to Configuration > Wireless > Radio1(5G) > WLAN > WLAN
# > WLAN Security
2. Select WPA-PSK / WPA2-PSK / WPA-auto-PSK on Authentication
Mode
3. Select suitable encryption mode on Cipher Mode
If Authentication Mode is WPA:
TKIP
+ AES
This algorithm automatically selects TKIP or AES based on
the client’s capabilities
TKIP
This algorithm provides greater compatibility with older client
devices, but
is not supported by the 802.11n standard.
AES
This algorithm provides enhanced security over TKIP, and is