User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濆濊澳
澳
AP accepts the clients to associate if the SNR of packets from the
clients is high than (
>) 30dB;
AP kicks out the associated client if the SNR of 10 consecutive
packets is below (<) 10 dB (30 dB
– 20 dB)
10. Click Submit
4.1.2.3 Step 3: Configure WLAN # Security Setting
4.1.2.3.1 Configure WLAN as Open Network
This setting is typically only used in a guest network. No security measure is enforced.
Figure 30 – 5G WLAN # Security Setting: Open Network
1. Go to Configuration > Wireless > Radio1(5G) > WLAN > WLAN
# > WLAN Security
2. Select Open on Authentication Mode
3. Select Disabled on Cipher Mode
4. Click Submit