User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濆濈澳
澳
11. Select Enable Inter-WLAN User Isolation checkbox that CPE
device block the users’ communication across different SSID in the AP
directly. This entry is optional.
12. Select Periodic Auto Channel Section checkbox to enable
scheduled channel selection task on the radio interface. This entry is
optional and only available if auto is selected on Radio Frequency. The
available schedule modes are:
Schedule
Mode
Select exact time and day(s) for selecting radio
frequency for the interface
Periodic
Mode
Select a countdown timer (minute) for selecting radio
frequency for the interface; 0 denotes disable.
13. Click Submit
4.1.2.2 Step 2: Configure WLAN # General Setting
Figure 29 – 5G WLAN # General Setting
1. Go to Configuration > Wireless > Radio1 (5G) > WLAN # >
More…
2. Select Enable WLAN checkbox to enable WLAN
3. Select Hide SSID checkbox to hide SSID name from its beacon
frame. This entry is optional.
4. Enter a unique name for the particular WLAN on SSID.
Note:
-
If you want to configure the same SSID on two different
WLAN; their security setting MUST be different from each other.
5. Select User Isolation checkbox to block user communication
within the same SSID in the AP directly. This entry is optional.