User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濆濆澳
澳
4.1.2 Radio1 – 5G
4.1.2.1 Step 1: Configure General Wireless Setting
Figure 28 - Radio1 (5G) General Setting
1. Go to Configuration > Wireless > Radio1(5G) > General
2. Select Enable Radio checkbox to enable radio interface
3. Select AP in Radio Mode
4. Select the correct country code on Country Code; this option
ensures that the CPE device uses only the radio channels allowed in your
country or region
5. Select suitable wireless mode on Wireless Mode; the options
include:
5G 54Mbps (802.11 a)
5G 216.7Mbps (802.11 na HT20)
5G 216.7Mbps (802.11 n-only HT20)
5G 450Mbps (802.11 n-only HT40+)
5G 450Mbps (802.11 na HT40+)
5G 450Mbps (802.11 na HT40-)
5G 450Mbps (802.11 n-only HT40-)
5G 289Mbps (802.11 ac HT20)