User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濆濄澳
澳
4.1.1.5 Step 4: Configure ACL Setting
Figure 26 – 2.4G WLAN # ACL Setting
1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN >
WLAN # > ACL Setting
2. Select appropriate option on Access Control List; options
include
Disable
ACL is disabled
Enabled –
Default
Allow
ACL is enabled. The MAC addresses
which are specified in the ACL will consider
as Deny. Every wireless client can associate
to the AP unless
its MAC address is on the
list
Enabled –
Default
Deny
ACL is enabled. The MAC addresses
which are specified in the ACL will consider
as Allow. Every wireless client CANNOT
associate to the AP unless its MAC address
is on the list
3. Select Manual Input on ACL Input Method if network administrator
prefers input the entry one by one manually
Or select File on ACL Input Method if network administrator prefers
upload a MAC address list (.txt file)
4. Enter MAC address entry one by one or upload the corresponding
file to CPE; it is optional
5. Click Submit
Note:
-
Network Administrator shall select Disable or Enabled –
Default Allow if no ACL entry will be input on CPE
4.1.1.6 Step 5: Configure WLAN # QoS
Please refer to Quality of Service (QoS) on page 129