User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濊澳
澳
4. Radios Settings
CPE products have both a high capacity 2.4 GHzradio and a 5 GHz radio. It can play
as different role in your network. This chapter shows the typical deployment scenarios and
configuration procedures.
4.1. Access Point Mode
Access Point (AP) allows wireless devices to connect to a wired network using 802.11
a/b/g/n/ac standards. Wireless clients connect the AP to join the network, such as laptops,
smart phones etc.
4.1.1 Radio0 – 2.4G
4.1.1.1 Configure General Wireless Setting
Figure 15 – 2.4G Radio General Setting
1. Go to Configuration > Wireless > Radio0 (2.4G) > General
2. Select Enable Radio checkbox to enable radio interface
3. Select AP on Radio Mode
4. Select the correct country code on Country Code; this option
ensures that the CPE device uses only the radio channels allowed in your
country or region
5. Select suitable wireless mode on Wireless Mode; the options
include: