User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濉濈澳
澳
4. Enter username on FTP Server User Name for logging in remote
FTP server
5. Enter password on FTP Server Password for logging in remote
FTP server
6. Enter IP address of remote FTP server on FTP Server IP Address
7. Specify service port of remote FTP server on FTP Server Port; 21
is default setting
8.
Select exact time and day(s) in Schedule Mode for uploading log to FTP
server;
Or select a countdown timer (minute) in Periodic Mode for uploading log to
FTP server
9. Click Submit
10. Click
Save & Apply
Ping Watchdog
Ping watchdog is mechanism that CPE reboots itself if it fails to communicate (ping)
to target host for serval time.
Figure 161 – Ping Watchdog
1. Go to Tools > Watchdog > Ping watchdog
2. Click Enable Ping Watchdog to enable this function
3. Type in IP address of target host in IP Address To Ping
4. Enter interval between each ICMP request in Ping Interval; 300 is
default setting. This entry is optional.
5. Specify delay time of each ICMP request in Startup Delay; 300 is
default setting. This entry is optional.
6. Specify fail tolerant in Failure Count to Reboot; 3 is default setting.
This entry is optional.
7. Click Submit
8. Click
Save & Apply