User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濉濅澳
澳
round-trip time between CPE and the host over an Internet Protocol (IP) network by using
ping tool.
Figure 157 – Ping Test
1. Go to Tools > Diagnosis > Ping
2. Type target IP address / host name in Ping IP Address/Host Name
3. Specify how many ICMP (ping) packet that CPE sends to the target
host in Packet Count; 4 is default setting. This entry is optional.
4. Specify the packet size of ICMP packet in Packet Size; 56 is default
setting. This entry is optional.
5. Click Start
6. Click Stop to terminate ping test if necessary
18.5. Traceroute Test
Network administrator tests the route (path) and measuring transit delays of packets
across an Internet Protocol (IP) network by using traceroute test.
Figure 158 – Tracerout Test