User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濈濉澳
澳
17.2.1.2 Channel Usage List
Tx(%) – average transmit frames percentage of operating channel
Rx(%) – average receive frames percentage of operating channel
Busy (%) – average busy state percentage of operating channel
Noise Floor (dBm) – indicate noise floor of operating channel and noise floor of chain
0, chain 1, and chain 2 on the control channel; if operating with 40MHz bandwidth, it shows
the noise floor of chain 0, chain 1, and chain 2 on the extension channel as well.
Interference Mitigation Offset (0-50dB) – signal offset option that will mask all noise
/ valid signal below 0-50 dB; 0 denotes disabled
17.2.1.3 Nearby AP List
If Nearby AP List is enabled, device collects nearby AP information and builds Nearby
AP List from all beacon frames received during operation. Information shows the SSID,
BSSID, authentication mode, cipher mode, operating channel, data rate, and received SNR
of collected APs.
17.2.1.4 Tx/Rx Statistics
This statistic shows traffic distribution about Radio 0/1 interface. The statistical data
includes distribution in terms of data rate and frame type for all incoming and outgoing data
frame via Radio 0/1 interface.