User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濈濇澳
澳
17.1.4 Interfaces
Interfaces provide the real time status of all interfaces on the CPE device.
Figure 149 – Interfaces
14.4.1.1 Ethernet (eth0) / Ethernet (eth1)
MAC – MAC address of Ethernet 0/1 interface
Link – indicate the status and operating mode of Ethernet 0/1
Transmit – indicate the traffic and instant throughput of transmission on Ethernet 0/1
Receive – indicate the traffic and instant throughput of receive operation on Ethernet
0 /1
Radio0 (2.4G) / Radio1 (5G)
MAC – MAC address of Radio 0 interface
Channel – indicate operating frequency (channel) of Radio 0/1
Wireless Mode – indicate 802.11 standards that Radio 0/1 operates
Noise Level – indicate the noise level in terms of dBm of operating channel
Transmission Power – indicate the total transmission power of Radio 0/1
Transmit – indicate the traffic and instant throughput of transmission on Radio 0/1
Receive – indicate the traffic and instant throughput of receive operation on Radio
0/1
Mode – indicate operating mode of Radio 0/1
WLANs - indicate the number of operating WLAN on Radio 0/1 (AP mode and
Repeater Mode only)
Clients - indicate the number of clients that Radio 0/1 servers currently (AP mode
and Repeater mode only)
Connection – indicate connection status between Radio 0/1 and remote AP (Station
mode only)
AP SSID – indicate the SSID that station associates with (Station mode only)
AP SNR – indicate received SNR from remote AP (Station mode only)