User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濈澳
澳
3.5.2 Assign IPv4 IP Address from DHCP server
Figure 10 – IPv4 WAN Setting (DHCP Client)
1. Go to Configuration > Network > General > WAN Settings (IPv4)
2. Select DHCP on Internet Connection Type
3. Click Enable DHCP Option 60 checkbox to specify vendor class
identifier. This entry is optional.
4. Enter a string between 1 and 32 characters long on DHCP Option
60. This entry is optional.
5. Click Submit
3.5.3 Assign Static IPv6 IP Address
Figure 11 – Enable IPv6 option
1. Go to Configuration > Network > General > Network Setting
2. Click Enable IPv6 checkbox
Figure 12 – IPv6 WAN Setting
3. Go to Configuration > Network > General > WAN Setting (IPv6)
4. Select Static on Internet Connection Type
5. Enter valid IP Address on IPv6 Address
6. Enter valid IP subnet mask on IPv6 Subnet Mask
7. Enter valid IP address of default gateway on IPv6 Default Gateway