User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濇濋澳
澳
15. SNMP
Simple Network Management Protocol (SNMP) is a Network management protocol
used almost exclusively in TCP/IP networks. SNMP provides a means to monitor and
control network devices, and to manage configurations, statistics collection, performance,
and security.
Figure 141 – SNMP Setting
1. Go to Administration > User Admin > SNMP
2. Select Enable SNMP checkbox to enable SNMP function
3. Type in suitable string in Read Community; the string of Read
Community between Network Manage System (NMS) and CPE must be
identical, otherwise, NMS cannot get information from CPE. public is default
setting.
4. Type in suitable string in Write Community; the string of Write
Community between Network Manage System (NMS) and CPE must be
identical, otherwise, NMS cannot modify CPE’s setting. netman is default
setting.
5. Click Submit
6. Click
Save & Apply
Note:
-
CPE support up to four trap host at the same time. The
information about trap hosts will be listed in the trap host table