User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濇澳
澳
Note:
-
In 802.3af power safe mode, CPE will operate in 2x3
MIMO with maximum transmission power 24 dBm.
3.5. Assign an IP Address to CPE Device
3.5.1 Assign Static IPv4 IP Address
Figure 9 – IPv4 WAN Setting (Static IP Address)
1. Go to Configuration > Network > General > WAN Settings (IPv4)
2. Select Static on Internet Connection Type
3. Enter valid IP Address on IPv4 Address; 192.168.1.222 is the
default setting
4. Enter valid IP subnet mask on IPv4 Subnet Mask; 255.255.255.0
is default setting
5. Enter valid IP address of default gateway on IPv4 Default Gateway
6. Enter valid IP address of DNS server on IPv4 DNS Server Address
Note:
- Click for adding more DNS;
- Click to remove existing DNS server entry
7. Click Submit