User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濆濊澳
澳
Figure 130 – Port Forward Setting
1. Go to Configuration > Network > Port Forward
2. Click on any ID
3. Click Enable checkbox to enable port forward profile
4. Enter the host’s IP address on Local IP Address that provides
service to hosts on WAN interface(s)
5. Enter the service listening port of the host on Local Port that
provides service to hosts on WAN interface(s)
6. Select suitable protocol(s) on Protocol Type. Options include
TCP & UDP
TCP
UDP
7. Enter the listening port at WAN side on Global Port
8. Enter any description on Description about this port forward profile.
This entry is optional.
9. Click Submit
" Step 3: Apply Submitted Configurations on the CPE Device
1. Click
Save & Apply from the top on the right.