User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濆濉澳
澳
- All IP address for leasing MUST be within the LAN IP
subnet (Refer to Step 4: Configure LAN IP Setting on page 132
for
more detail)
" Step 4: Apply Submitted Configurations on the CPE Device
1. Click
Save & Apply from the top on the right.
11.3. Port Forward
Port forward is an application of Network Address Translation (NAT) that redirects a
communication request between WAN interface(s) and LAN interface(s) while the packets
are traversing CPE device in gateway mode. This technique is most commonly used to
make services on a host residing on LAN interface(s) available to hosts on WAN
interface(s), by remapping the destination IP address and port number of the
communication to a host on LAN side.
" Step 1: Configure as Gateway Mode
Refer to IP Gateway on page 132 for more detail
Figure 129 – Port Forward List
" Step 2: Configure Port Forwarding