User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濆濈澳
澳
- DHCP Server is applicable on Gateway mode ONLY
" Step 1: Configure as Gateway Mode
Refer to IP Gateway on page 132 for more detail
" Step 2: Enable DHCP Server
Figure 127 – DHCP Server Setting
1. Go to Configuration > Network > DHCP
2. Select Server Mode on DHCP Server
3. Click Submit
" Step 3: Assign IP Address Range for Leasing on DHCP Server
Figure 128 – Address Pool Setting
1. Go to Configuration > Network > DHCP
2. Click on any Pool ID
3. Click Enable Pool checkbox
4. Enter the first valid IP address on Start IP Address
5. Enter the last valid IP address on End IP Address
6. Enter lease time between 60s and 604800s on Default Lease Time;
86400s is default setting.
7. Click Submit
Note: