User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濆濆澳
澳
11.1. IP Gateway
" Step 1: Configure WAN IP Setting
Refer to Assign an IP Address to CPE Device on page 14 for more detail
" Step 2: Configure Radio Settings
Please refer to Radios Setting on Page 17 to complete the radio settings
" Step 3: Enable Gateway Mode
Figure 123 – Network Setting
1. Go to Configuration > Network > Network Setting
2. Select Gateway Mode on Network Setting
3. Click Submit
" Step 4: Configure LAN IP Setting
Figure 124 – LAN Setting (IPv4)
1. Go to Configuration > Network > LAN Setting (IPv4)
2. Enter valid IP Address on LAN IP Address; 192.168.98.1 is the
default setting
3. Enter valid IP subnet mask on LAN IP Subnet Mask;
255.255.255.0 is default setting
4. Click Submit
Figure 125 – WAN/LAN Interface Assignment