User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濆濅澳
澳
Figure 122 – 2.4G WLAN # QoS
1. 2.4G Interface: Go to Configuration > Wireless > Radio0(2.4G) >
WLAN > WLAN # > QoS
5G Interface: Go to Configuration > Wireless > Radio1(5G) > WLAN
> WLAN # > QoS
2. Select Enable DSCP-to-WMM Mapping checkbox that CPE
provides different QoS to the incoming packet with the corresponding DSCP
value
3. Enter DSCP value on Best Effort (BE), Background (BK), Video
(VI), and Voice (VO); these entry is optional
4. Click Submit
5. Click
Save & Apply from the top on the right
Note:
-
CPE classify the packet without DSCP marking as Best
Effort (BE) traffic
11. IP Gateway
To provide the flexibility on network deployment, CPE device can act as IP gateway
on the network. IP Gateway is a network element that connects to two or more IP network
physically, no matter via wire medium or wireless medium.
Note:
- Interfaces under
the same group work as switch
interfaces. E.g. Ethernet 0 and WLAN 0 of Radio 1 are assigned as
WAN, they forward packet between them based on MAC address.