User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濅濇澳
澳
6. VLAN Configuration
VLAN is layer-2 network domain that may be partitioned to create multiple distinct
broadcast domains, which are mutually isolated so that packets can only pass between
them via one or more routers.
Note:
- VLAN is applicable on Switch mode ONLY
6.1 Configure Radio Settings
Please refer to Radios Setting on Page 17 to complete the radio settings
6.2 Enable VLAN
Figure 114 – VLAN Setting
1. Go to Configuration > Network > VLAN
2. Click Enable VLAN checkbox to enable VLAN on CPE device
3. Click Submit