User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濅濄澳
澳
default setting.
4. Click Submit
5. Click
Save & Apply from the top on the right.
5.7. Beacon interval of BSS
Beacon interval stands for the time interval of beacon transmissions of each
supported BSS. The unit is in term of millisecond (ms). The beacon interval can be
configured between 40 and 3500ms. The default setting is 100ms, i.e. 10 beacons per
second.
Figure 110 – Beacon Interval Setting
1. 2.4G Interface: Go to Configuration > Wireless > Radio0 >
Advanced > Advanced Settings
5G Interface: Go to Configuration > Wireless > Radio1 > Advanced
> Advanced Settings
2. Select Beacon Interval Auto checkbox CPE tunes the interval of
beacon transmissions of each supported BSS automatically. Enabling is
default and recommended setting
3. Enter interval time between 40ms and 3500ms on Beacon Interval;
this option is available if Beacon Interval Auto is NOT enabled. Each BSS
share this setting.
4. Click Submit
5. Click
Save & Apply from the top on the right.
5.8. Nearby AP List
Figure 111 – Nearby AP List Setting
To configure nearby AP list, perform the followings:
1. 2.4G Interface: Go to Configuration > Wireless > Radio0(2.4G) >
Advanced > Advanced Settings