User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濅澳
澳
Figure8 – Connect to AP
3.3. Login the AP (via Ethernet)
1. Open a Web browser from the computer.
2. Type
http://192.168.1.222 in the address bar or location bar (see
3. Figure 7).
4. Type admin (default username) in Username
5. Type admin (default password) in Password
6. Click Login
Figure 7 – CPE Series Product’s Login Page
Secondary IP Address of CPE Series Products
The default IP address of CPE is 192.168.1.222/24. CPE series products support a
fixed IP address on the Ethernet connection called Secondary IP Address. This secondary
IP address is 192.168.99.x/24 where x denotes as the decimal value of the last byte of the
Ethernet MAC address on the access point.
Example 1:
Device Ethernet MAC address: 00:19:BE:20:03:8C
Secondary IP Address of this device:
192.168.99.140 (8C (HEX) ! 140 (DEC))
The secondary IP address uses IP range from 192.168.99.5/24 to 192.168.99.254/24.
The rest of IP addresses are reserved. If the last byte of a MAC address matches any of