User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濄濌澳
澳
3. Select the maximum number of transmission between 1 and 3 on
Max Rx Streams
4. Click Submit
5. Click
Save & Apply from the top on the right.
5.5. Delivery Traffic Indication Message (DTIM) time
According to the 802.11 standards, a Delivery Traffic Indication Map (DTIM) period
value is a number that determines how often a beacon frame includes a Delivery Traffic
Indication Message, and this number is included in each beacon frame. The 802.11
standards define a power-save mode for client devices. In power-save mode, a client
device may choose to sleep for one or more beacon intervals waking for beacon frames
that include DTIMs. When the DTIM period is 2, a client device in power-save mode will
awaken to receive every other beacon frame. Upon entering power-save mode, a client
device will transmit a notification to the access point, so that the access point will know
how to handle unicast traffic destined for the client device.
Figure 108 – DTIM Setting
1. 2.4G Interface: Go to Configuration > Wireless > Radio0 >
Advanced > Advanced Settings
5G Interface: Go to Configuration > Wireless > Radio1 > Advanced
> Advanced Settings
2. Specify the interval time between 1 and 255 in DTIM.
3. Click Submit
4. Click
Save & Apply from the top on the right.
Note:
-
The higher the DTIM period, the longer a client device
may sleep and therefore the more power that particular client
device may potentially save.
5.6. WiFi Protect mechanism [Hidden node problem]
In wireless networking, the hidden node problem or hidden terminal problem occurs