User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濄濋澳
澳
5.3. Frame Aggregation
Frame aggregation allows the device to send multiple frames per single access to the
medium by combining frames together into one larger frame.
Figure 106 – Frame Aggregation Configuration
1. 2.4G Radio: Go to Configuration > Wireless > Radio0(2.4G) >
Advanced > Advanced Settings
5G Radio: Go to Configuration > Wireless > Radio1(5G) > Advanced
> Advanced Settings
2. Click AMPDU checkbox to enable aggregation of MAC protocol
data unit (MPDU)
3. Enter the maximum number of data frame between 1 and 64 on
AMPDU Limit that CPE pushes MPDUs into single PPDU; 64 is default
setting
4. Select AMSDU checkbox to enable aggregation of MAC service
data unit; CPE pushes aggregated MSDU (MAC service data units) into a
single MPDU
5. Click Submit
6. Click
Save & Apply from the top on the right.
5.4. Spatial Streaming
With multiple-input and multiple-output (MIMO) technique, CPE can use one or more
individual stream for data transmission and reception. In general, more available streams
increase spatial efficiency.
Figure 107 – Spatial Streaming Configuration
1. 2.4G Interface: Go to Configuration > Wireless > Radio0 >
Advanced > Advanced Settings
5G Interface: Go to Configuration > Wireless > Radio1 > Advanced
> Advanced Settings
2. Select the maximum number of transmission between 1 and 3 on
Max Tx Streams