User Manual

濖濣濘激濅濇濈濋激濔濖激濦激濜澳濖瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濠濴瀁瀈濴濿澳
濄濃濄澳
澳
2. Select Enable DSCP-to-WMM Mapping checkbox that CPE
provides different QoS to the incoming packet with the corresponding DSCP
value
3. Enter DSCP value on Best Effort (BE), Background (BK), Video
(VI), and Voice (VO); these entry is optional
4. Click Submit
Note:
-
CPE classify the packet without DSCP marking as Best
Effort (BE) traffic
4.3.2.5 Configure WLAN # General Setting
Figure 92 - 5G WLAN # General Setting
1. Go to Configuration > Wireless > Radio1 (5G) > WLAN # >
More…
2. Select Enable WLAN checkbox to enable WLAN
3. Select Hide SSID checkbox to hide SSID name from its beacon
frame. This entry is optional.
4. Enter a unique name for the particular WLAN on SSID.
Note:
-
If you want to configure the same SSID on two different
WLAN; their security setting MUST be different from each other.
5. Select User Isolation checkbox to block user communication
within the same SSID in the AP directly. This entry is optional.