Configuration Manual

90
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
2. Select Enable DSCP-to-WMM Mapping checkbox that AP provides
different QoS to the incoming packet with the corresponding DSCP
value
3. Enter DSCP value on Best Effort (BE), Background (BK), Video (VI),
and Voice (VO); these entry is optional
4. Click Submit
Note:
- AP classify the packet without DSCP marking as Best Effort (BE)
traffic
Step 5: Configure WLAN # General Setting
Figure 93 - 5G WLAN # General Setting
1. Go to Configuration > Wireless > Radio1 (5G) > WLAN # > More…
2. Select Enable WLAN checkbox to enable WLAN
3. Select Hide SSID checkbox to hide SSID name from its beacon frame.
This entry is optional.
4. Enter a unique name for the particular WLAN on SSID.
Note:
- If you want to configure the same SSID on two different WLAN;
their security setting MUST be different from each other.
5. Select User Isolation checkbox to block user communication within
the same SSID in the AP directly. This entry is optional.
6. Deselect the DHCP Trust Port checkbox to prevent illegal DHCP
servers offering IP address to DHCP clients via this WLAN. This entry is
optional.