Configuration Manual

85
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
11. Enter SNR value from 0dB to 10dB on Scan SNR Fluctuation Threshold.
AP device perform channel scan when the fluctuation of received
signal level from a serving AP is larger than (>) this value. 5dB is
default setting.
12. Select Roaming Hysteresis checkbox to prevent AP jumping
between two APs due to the received signal level fluctuation. It is
known as Ping-Pong effect. This entry is optional.
13. Select desired channel(s) on Background Scan Channel. AP scan
the selected channel if the channel scan for roaming is triggered. If
no any channels are checked in a list, all channels are scanned. This
entry is optional.
14. Click Submit
Step 3: Configure WLAN15 Security Setting
Figure 86 – WLAN15 Security Setting
Configure to associate Open WLAN
Figure 87 - WLAN15 Security Setting – Associating Open Network