Configuration Manual

83
Dual-band 3x3 802.11 ac WiFi Access Point
Configuration Manual
Radio1 – 5G
Step 1: Configure General Wireless Setting
Figure 84 – 5G General Setting
1. Go to Configuration > Wireless > Radio1(5G) > General
2. Select Enable Radio checkbox to enable radio interface
3. Select Repeater in Radio Mode
4. Select the correct country code on Country Code; this option
ensures that the AP device uses only the radio channels allowed in
your country or region
5. Select suitable transmission power on Transmission Power;
Note:
- You should follow the regulation from local Communications
Authority
6. Enter the maximum associated client between 1 and 256 on
Maximum Client that the radio interface serves. 256 is the default
setting. This entry is optional.
7. Select Enable Inter-WLAN User Isolation checkbox that AP device
block the users’ communication across different SSID in the AP
directly. This entry is optional.
8. Click Submit
Step 2: Configure WLAN 15 General Setting (Station / CPE)
1. Go to Configuration > Wireless > Radio1 (5G) > WLAN 15 > More…
2. Select Lock AP Mac checkbox to force station that associate the AP
with MAC address in Remote AP MAC only. This entry is optional.