Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

4.3. Repeater Mode

Radio0 – 2.4G

Step 1: Configure General Wireless Setting

Figure 62 - 2.4G General Setting

1. Go to Configuration > Wireless > Radio0(2.4G) > General

2. Select Enable Radio checkbox to enable radio interface

3. Select Repeater in Radio Mode

4. Select the correct country code on Country Code; this option

ensures that the AP device uses only the radio channels allowed in

your country or region

5. Select suitable transmission power on Transmission Power;

Note:

- You should follow the regulation from local Communications

Authority

6. Enter the maximum associated client between 1 and 256 on

Maximum Client that the radio interface serves. 256 is the default

setting. This entry is optional.

7. Select Enable Inter-WLAN User Isolation checkbox that AP device

block the users’ communication across different SSID in the AP

directly. This entry is optional.

8. Click Submit