Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

Step 4: Configure WLAN 0 QoS

Figure 51 – 2.4G WLAN 0 QoS

1. Go to Configuration > Wireless > Radio0(2.4G) > Station > WLAN0 >

QoS

2. Select Enable DSCP-to-WMM Mapping checkbox that AP provides

different QoS to the incoming packet with the corresponding DSCP

value

3. Enter DSCP value on Best Effort (BE), Background (BK), Video (VI),

and Voice (VO); these entry is optional

4. Click Submit

Note:

- AP classify the packet without DSCP marking as Best Effort (BE)

traffic

Step 5: Apply Submitted Configurations on the AP Device

1. Click Save & Apply from the top on the right.