Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

4.2. Station / CPE Mode

Station / CPE acts as a terminal and associated equipment located at

a subscriber's premises and connected with a carrier's

telecommunication channel at the demarcation point.

Radio0 – 2.4G

Step 1: Configure General Wireless Setting

Figure 42 – 2.4G General Setting

1. Go to Configuration > Wireless > Radio0(2.4G) > General

2. Select Enable Radio checkbox to enable radio interface

3. Select Station in Radio Mode

4. Select maximum transmission power on Transmission Power

5. Click Submit