Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

Step 2: Configure WLAN # General Setting

Figure 30 – 5G WLAN # General Setting

1. Go to Configuration > Wireless > Radio1 (5G) > WLAN # > More…

2. Select Enable WLAN checkbox to enable WLAN

3. Select Hide SSID checkbox to hide SSID name from its beacon frame.

This entry is optional.

4. Enter a unique name for the particular WLAN on SSID.

Note:

- If you want to configure the same SSID on two different WLAN;

their security setting MUST be different from each other.

5. Select User Isolation checkbox to block user communication within

the same SSID in the AP directly. This entry is optional.

6. Deselect the DHCP Trust Port checkbox to prevent illegal DHCP

servers offering IP address to DHCP clients via this WLAN. This entry is

optional.

7. Specify the suitable privilege of associated clients on Access Traffic

Right; the options include

Full Access

Associated client can access Internet and

manage AP

AP Management Only

Associated client can manage AP only, but

not able to access the Internet

AP Management Disable

Associated client can access the Internet, but

not able to manage AP

8. Specify the maximum associated clients between 1 and 256 on Max

Clients for this WLAN. 256 is the default setting.

Note:

- Max Clients in WLAN 0 – 15 MUST be smaller than or equal to

( ) the Max Clients setting on Radio General Setting