Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

Radio1 – 5G

Step 1: Configure General Wireless Setting

Figure 29 - Radio1 (5G) General Setting

1. Go to Configuration > Wireless > Radio1(5G) > General

2. Select Enable Radio checkbox to enable radio interface

3. Select AP in Radio Mode

4. Select the correct country code on Country Code; this option

ensures that the AP device uses only the radio channels allowed in

your country or region

5. Select suitable wireless mode on Wireless Mode; the options include:

5G 54Mbps (802.11 a)

5G 216.7Mbps (802.11 na HT20)

5G 216.7Mbps (802.11 n-only HT20)

5G 450Mbps (802.11 n-only HT40+)

5G 450Mbps (802.11 na HT40+)

5G 450Mbps (802.11 na HT40-)

5G 450Mbps (802.11 n-only HT40-)

5G 289Mbps (802.11 ac HT20)

5G 600Mbps (802.11 ac HT40+)

5G 600Mbps (802.11 ac HT40-)

5G 1.3Gbps (802.11 ac HT80); Default Setting