Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

Step 6: Configure WLAN # Bandwidth Control

Figure 28 – 2.4G WLAN # Bandwidth Control

1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN > WLAN # >

Bandwidth Control

2. Specify the uplink and downlink limitation under Based on WLAN for

the particular WLAN

Or specify the uplink and downlink limitation under Based on Station

for each associated station. 0 is default value and denotes as

disable

3. Click Submit

Step 7: Apply Submitted Configurations on the AP Device

1. Click Save & Apply from the top on the right.