Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

Configure WLAN with WAPI-PSK Authentication

Figure 26 - 2.4G WLAN # Security Setting: WAPI-PSK Authentication

1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN > WLAN # >

WLAN Security

2. Select WAPI on Authentication Mode

3. Select SMS4 in Cipher Mode

4. Enter in an ASCII string between 8 and 63 characters or a HEX string

with 64 characters long in Pass Phrase that users will use to connect

to the wireless network.

5. Enter interval time between 60 and 2147483647s in Unicast Key

Update Interval; 86400 is default setting. This entry is optional.

6. Enter interval time between 60 and 2147483647s in Multicast Key

Update Interval; 86400 is default setting. This entry is optional.

7. Click Submit