Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

Note:

- TKIP is not supported by 802.11n standard. If selected TKIP, the

802.11n’s devices will be limited to 802.11g transfer rate, i.e.

up to 54 Mbps

4. Enter interval time in second in Group Key Update Interval. 86400 is

default setting. This entry is optional.

5. Enter an ASCII string between 8 and 63 characters long or a HEX

string with 64 characters long on Pass Phrase that users will use to

connect to the wireless network.

6. Click Submit

Configure WLAN with WAPI Authentication

WLAN Authentication and Privacy Infrastructure (WAPI) is a Chinese

National Standard for Wireless LANs (GB 15629.11-2003).

Figure 23 - 2.4G WLAN # Security Setting: WAPI Authentication

1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN > WLAN # >

WLAN Security

2. Select WAPI on Authentication Mode

3. Select SMS4 in Cipher Mode