Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

the clients is high than (>) 30dB;

AP kicks out the associated client if the SNR of 10 consecutive

packets is below (<) 10 dB (30 dB – 20 dB)

10. Click Submit

Step 3: Configure WLAN # Security Setting

Configure WLAN as Open Network

This setting is typically only used in a guest network. No security

measure is enforced.

Figure 18 – 2.4G WLAN # Security Setting: Open Network

1. Go to Configuration > Wireless > Radio0(2.4G) > WLAN > WLAN # >

WLAN Security

2. Select Open on Authentication Mode

3. Select Disabled on Cipher Mode

4. Click Submit