Configuration Manual

Dual-band 3x3 802.11 ac WiFi Access Point

4. Select the correct country code on Country Code; this option

ensures that the AP device uses only the radio channels allowed in

your country or region

5. Select suitable wireless mode on Wireless Mode; the options include:

2.4G 11Mbps (802.11 b)

2.4G 54Mbps (802.11 bg)

2.4G 54Mbps (802.11 g-only)

2.4G 216.7Mbps (802.11 ng HT20); Default Setting

2.4G 216.7Mbps (802.11 n-only HT20)

2.4G 450Mbps (802.11 ng HT40+)

2.4G 450Mbps (802.11 n-only HT40+)

2.4G 450Mbps (802.11 ng HT40-)

2.4G 450Mbps (802.11 n-only HT40-)

6. Select suitable option on Legacy 11b Data Rate Support for legacy

client compatibility. In order to enhance the spectrum efficiency, low

data rates (1/2/5.5/11M) should be eliminated. This entry is optional.

Options include:

1/2/5.5/11M (Best compatibility

/Poor performance)

All legacy clients will be supported

5.5/11M (Good compatibility

/Good performance)

Clients only capable of 1/2Mbps will

not be supported

Disable All (Poor compatibility/

Best performance)

Clients only capable of 802.11b

standard will not be supported

Note:

- 2.4G 11Mbps (802.11 b) is not applicable.

7. Select suitable operating channel on Radio Frequency;

Note:

- You should select the suitable operating channel based on

the on-site channel scan result.

8. Select suitable transmission power on Transmission Power;

Note:

- You should follow the regulation from local Communications

Authority

9. Enter the maximum associated client between 1 and 256 on

Maximum Client that the radio interface serves. 256 is the default

setting. This entry is optional.